|
|
 |
|
Each
ENERPRO auxiliary firing board provides the ability
to drive six to twelve additional SCRs. You can
also daisy-chain up to five auxiliary firing boards
with a single Enerpro firing board. Auxiliary
firing boards can be used with the FCRO-4100,
FCOG-6100, FCOG-1200 and FCOVF-6100 models.
Models:
FCOAUX-60
FCOREM-60
FCOA-1200
|
| |
|
Detail
View
|
FCOAUX-60
Six-SCR
Auxiliary Firing Board
The
FCOAUX-60 operates in conjunction with the
FCOG-6100 board,
or the FCRO-4100
board, where operation of more than six
(or four) is required. Typical examples
would be paralleled SCR applications and
4-Quadrant operation.
Used in Parallel SCR Gating
Used in Power Supply Reversing Applications
product data sheet...
Back
to Top
|
|
Detail View
|
FCOREM-60
Six-SCR
Auxiliary Firing Board
The
FCOREM-60 is the high voltage version of
the FCOAUX-60, when in combination with
the FCOHV-61 firing board, allows 4-quadrant
operation at mains voltage up to 900 VAC.
This firing board is used whenever the firing
board and the SCR are separated by large
distances.
High
Gate Drive
Remote Operation
product data sheet...
Back
to Top
|
|
Detail View
|
FCOA-1200
Twelve-SCR
Auxiliary Firing Board
The
FCOA-1200 board supplies delayed hard firing
"picket fence" gate pulses for
gating paralleled and series connected 12-pulse
converters or AC controllers. This board
is used in conjunction with the FCOG-6100
board, or DDOG-1200 board, utilizing the
logic circuitry.
Used
in High Current Applications
Used in Parallel SCR Applications
Used in High Voltage Applications with SCRs
in Series
product data sheet...
Back
to Top
|
|
|
Home
-- About Us -- News
-- Sales Reps -- Contact
Us -- Site Map
5780 Thornwood
Drive, Goleta, CA 93117 USA (800)
576-2114 (805) 683-2114
email: info@enerpro-inc.com
©
2008 ENERPRO, Inc.
All rights reserved. Specifications subject to change.
|
