Detail View

CR-400
Current Regulator with CT Feedback

The CR-400 is used in conjunction with the FCOG-6100 Firing board in current limited AC motor starters by sensing the motor current from customer provided current transformers. This combination of boards becomes the Enerpro MSA-6 Motor Starter two board assembly.

Product Data Sheet...
Wiring Diagram

Back to Top

The CR-600 is used in in conjunction with the FCOG1200 12-Pulse Firing Board and ISOVLCL-3 or-4 Regulator Board.

Product Data Sheet...Contact info@enerpro-inc.com
Wiring Diagram

Back to Top

Detail View

CTRCT-1
Current Trip/Regulator

The CTRCT-1 board is designed to regulate the current in an AC controller and provide an over-current trip feature which will latch off the output. This latch can be configured for automatic or manual reset.

Product Data Sheet...
Wiring Diagram
Connection Diagram, 3Ø AC Open Loop Control, I-Limiting (Reference)
Operating Manual...
Mechanical Drawing...

Back to Top

Detail View

CTRCT-2
Current Trip/Regulator

The CTRCT-2 is an expanded version of the CTRCT-1. This enables the customer to provide two command inputs which allows for automatic switching from current limiting operation to current regulated operation. Additionally, the CTRCT-2 adds the ability to control the ramp time of the soft-start feature.

Ramp Start

Product Data Sheet...
Wiring Diagram...
Connection Diagram, Current Limited 3Ø Converter(Reference)
Operating Manual...
Mechanical Drawing... Pending

Back to Top

Detail View

EA6-1
Voltage or Current Regulator

Designed to mount "piggyback" style above the firing board, the EA6-1 provides proportional and integral regulation, an inhibit inverter and an onboard bias adjustment to assist in scaling the command voltage.

Optional Inhibit Inverter

Product Data Sheet...
Wiring Diagram...

Back to Top

Detail View

ISOVLCL-3
Voltage/Current Limiter with Isolated Feedback


Current Trip
Galvanic Isolation
Soft Start

Product Data Sheet...Pending, based on ISOVLCL-1 with improvements
Wiring Diagram
Operating Manual...Pending, based on ISOVLCL-1 with improvements
Mechanical Drawing...

Back to Top

Detail View

ISOVLCL-4
Voltage/Current Limiter with Isolated Feedback


Overvoltage Trip
Remote Drivers
Latched Inhibit

Product Data Sheet...Pending, based on ISOVLCL-2 with improvements
Wiring Diagram
Operating Manual...Pending, based on ISOVLCL-2 with improvements
Mechanical Drawing...
 

Back to Top

Detail View

PTIR-1
One-Phase Polarity Transition; Inhibit & Voltage Regulator

The PTIR-1 board is a "piggyback" addition to the FCRO-4100 board, typically used in 4-quadrant applications. It allows the user to use the PTIR-1 as a voltage regulator, and use the onboard circuitry of the FCRO-4100 for current regulation. In 4-quadrant operation when the polarity is reversed, the PTIR-1 phases back the SCRs over a pre-determined time, inhibits and then enables the firing board in the predetermined ramp start time.

Voltage/Current Regulation
Optional Polarity
Transition Inhibit

Product Data Sheet...
Wiring Diagram...

Back to Top

Detail View

VRCL1P-1
Voltage Regulator Current Limiter

The VRCL1P-1 is used with the FCRO-4100 4 SCR single-phase firing board, providing voltage regulation and current limit. The regulator is in voltage regulation mode when the load current is less than the commanded current. When the load current becomes greater than what is commanded, the regulator is in current limit mode.
Product Data Sheet...
Wiring Diagram
Mechanical Drawing, Assembled with FCRO4100 Board

Back to Top